hardwood veneered plywood

Plywood

Standard plywood with veneer core and veneer face. For interior and exterior uses.

Veneer Faced Plywood

Yalong Wood has many years of experience producing a variety of veneer faced plywood manufactured in China.

It is very important to us that that all our products are produced to a high standard and made with integrity. Our team of inspectors that make sure all panels produced meet or exceed customers’ expectation.

Hardwood faced plywood and fancy plywood are intended for use in non-structural applications where a high-quality aesthetic finish is required such as manufacture of cabinets, furniture, store displays and architectural decorations, interior wall panelling and fitments but must not be used in exposed, wet or damp conditions.

Brand: YALONGPLY

hardwood faced plywood
commercial plywood

Core: Poplar Veneer

Face: Okoume, Bintangor, Pine, EV

Glue: Urea-Formaldehyde

Features:

  • Manufactured from sustainably-grown Chinese plantation poplar.
  • Available in B, C, and D grade surface veneer grades.
  • Sheet Thickness from 2mm to 25mm.
  • Sheet Size 1220x2440mm or custom cut.
  • FSC Certified.
furniture plywood

Core: Selected Poplar/Eucalyptus

Face: Bleached Poplar, Okoume, Pine, Birch, Oak, Walnut, EV

Glue: Urea-Formaldehyde (CARB P2 Grade available)

Features:

  • Core manufactured from top grade poplar/eucalyptus.
  • Available in many veneer species from tropical hardwood to pine and birch.
  • Sheet Thickness from 4mm to 21mm.
  • Sheet Size 1220x2440mm or custom cut.
  • FSC Certified.
WBP Plywood

Core: Selected Poplar/Eucalyptus

Face: Okoume, Bintangor, Pine, Birch

Glue: Melamine, Phenolic

Features:

  • Manufactured from selected veneers.
  • Waterproof glue is a must.
  • Hot-pressed under super high pressure.
  • Sheet Size 1220x2440mm or custom cut.
  • FSC Certified.

Specifications

Size1220*2440mm, 1250*2500mm, 915*2135mm, 720/820/920*2150mm
Thickness2-30mm
Core VeneerPoplar, Eucalyptus, Birch, FSC Certified Veneers
Face VeneerHardwood veneers such as Bintangor, Sapele, Okoume, Pencil Cedar, Birch, Bleach Poplar, Engineered Poplar, Radiata Pine, Recon Veneers, Black Walnut, Red Oak, Burma Teak
AdhesiveUrea Formaldehyde Resin (UF)
Melamine Urea Formaldehyde Resin (MUF)
Phenol Formaldehyde Resin (PF)
Formaldehyde LevelClass E1 (EN636, EN717-2)
CARB Phase II (P2)
Resistance To WaterMR (Moisture Resistant)
WBP (Weather and Boiling Proof)
MOQ50 Cubic Meters

Face Veneer Species

The veneers we use for plywood surfaces are primarily natural sliced and peeled veneers. Wood species range from local poplar wood to tropical hardwood, baltic birch, North American walnut, and Burma teak. The peeled veneers can make a surface for fancy plywood. Not only hardwood veneers, but we also laminate radiata pine and larch pine on the plywood.

Besides the natural veneers, we can also use reconstituted veneer. The recon veneer is a type of rotary cut veneer created from cheaper species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain. If you don’t find the veneer you like on the page, you may contact our sales for more choices and colors.

Okoume

Bintangor

Pencil Cedar

Pine

Red Oak

Black Walnut

Sapele

Burma Teak

White Birch

Natural Birch

White Maple

Bleeched Poplar

Core Types

We use poplar veneer to make plywood core for most of our production. Poplar density is around 520 kgs per cubic meter. And it is a perfect material for making decent plywood at a low cost. Besides, we use eucalyptus core, combi core, finger joint core, birch core, etc.

One Time Hot Press Plywood

Plywood Substrate not sanded. Final sheet not polished.

  • Poplar core veneers coated with glue
  • Cold Pressing (Pre-pressing)
  • Hardwood faces laminated with hot press machine (only one hot press).
  • Trimming

Two Times Hot Press Plywood

Plywood Substrate sanded and repaired. Final sheet polished.

  • Poplar core veneers coated with glue
  • Cold Pressing (Pre-pressing)
  • Hot Pressing (1st hot press)
  • Substrate Repaired with Putty.
  • Calibrating
  • Hardwood faces laminated with hot press machine (2nd hot press).
  • Polishing
  • Trimming

Hardwood Plywood Uses

Interior

Furniture

Indoor Packging

Industrial


FAQ

What is the maximum and minimum thickness of hardwood plywood you can produce?

Min 2.0mm to Max 50mm.

What is the largest size plywood you can do?

1800x3600mm.

Is your hardwood faced plywood calibrated?

We calibrate each plywood to make sure it is flat and strong with attractive appearance. If you don’t need calibrated plywood we can offer you one time hot press plywood.

Where is your hardwood harvested?

Most of them are tropical hardwood from Africa, Malaysia and Russia.

Do you make WBP plywood?

Yes. WBP Plywood is a hardwood faced plywood made with weather and boiling proof glue such as the phenolic adhesive.

Is your WBP plywood 100% waterproof?

It is water resistant but not 100% waterproof. Because the moisture can go into any type of plywood through its glueline and surfaces.

Is POPLAR a hardwood or softwood?

Poplar is actually a hardwood but many people think it as a softwood because its characteristic is more like a softwood. Poplar grain is typical hardwood grain though.

Open chat
Chat With Us On Whatsapp