F17 Formply

F17 formply is a black film faced concrete forming plywood conforming to AS 6669 standard in Australia. The latest standard is AS 6669:2016.

The formply is a special type of film faced plywood because it is much more stronger than the regular film faced ply.

F17 formply manufacturer

Specifications

Sizes1200 x 1800 x 17mm, 1200 x 2400 x 17mm
Stress GradeF17, F14
GlueA bond
FilmBlack film on both sides
EdgesWaterproof paint

Requirement of F17

Requirement of different stress grades

How to Make F17 Formply?

The F17 formply in China is mostly manufactured with eucalyptus core with a poplar face veneer (or eucalyptus face veneer). The core veneers are bonded with phenolic glue (A-bond).

Both sides of the plywood are covered with phenolic glue coated film, usually Dynea brand film for less water absorbing.

The F17 formply production should be controlled and monitored carefully. The parameter of the hot press machine is very important for creating a strong plywood.

What is a good F17 formply?

A good formply should be WBP (weather and boiling proof). It should be able to work under extreme weather in Brisbane, Sydney, Melbourne, Perth and Adelaide.

The panel should be square and leaves tiny gaps between different sheets for a good concrete forming. Need to have good squareness.

The panel should not leave a stain on the concrete after it is stripped from it.

The formply should be reused many times if carefully used.

F17 Formply Shipment

1200 x 1800 x 17mm, 40 pcs/pack, 27 packs/40ft container.

1200 x 2400 x 17mm, 52 pcs/pack, 16 packs/40ft container.

F17 formply shipment

Buy F17 Plywood

Email: sales@yalongwood.com